When a property in Edgewood needs electrical work, the call comes in from a homeowner who has been putting it off, a landlord whose tenant just reported a dead circuit, or a builder finishing out a structure that needs a supply run to a detached garage or shop. Whatever the situation, Silver Stream Electric takes the call, works through what the job involves, and gets an electrician scheduled. Same-day service is often available, and the price is confirmed before anything is booked.
Edgewood is a town where the housing stock covers a wide range, from newer builds on larger lots to older properties that have been added onto over the years without much documentation. Outbuildings, workshops, and electric gates are common. Wiring that was correct when it was installed may not meet what current code requires. We handle all of it, and we explain what we find before any work begins.
Electrical problems do not always happen at a convenient time, and some of them cannot be left until next week. A tripped breaker that will not reset, an outlet that has gone completely dead, or a panel that is making noise all need attention sooner rather than later. We take calls every day from 6:00 AM to 8:30 PM, and same-day appointments are often available for repairs that need to move quickly.
For rental properties, we work around tenants so the unit stays accessible and the disruption stays manageable. For a business or a workspace that has to keep running, we assess what can be isolated and what needs to be addressed immediately. The goal is to get the circuit working and the property safe without creating more disruption than the job requires.
Scheduling a service call is simple. You describe what you are seeing, we ask a few questions, and we give you a rate before anything is confirmed. We answer the phone. We dispatch the electrician. We keep it simple.
Not every electrical call is the same kind of job, and the situation that leads to it usually tells you which category it falls into. A flickering light is a different problem from a panel that trips repeatedly under load, and both are different from a property that needs new wiring run to an outbuilding. Here is how those categories break down.
A dead outlet or a tripping breaker is the most common reason someone calls. We trace the fault from the symptom back to the source, whether that is a loose connection, a failed device, a wiring fault, or a breaker that has reached the end of its life. GFCI outlets in kitchens, bathrooms, and exterior areas fail over time and stop protecting the circuit the way they should. AFCI breakers that nuisance-trip can sometimes be reset, but when they keep going, the circuit needs a closer look. We test, identify, and repair before we leave. Electrical work done to the standard the next inspection expects is the baseline for every repair we carry out.
Properties in this area that were built or wired before modern appliance loads became standard often run into capacity problems when something new is added. A subpanel for a detached garage, a dedicated circuit for a workshop, or a 200-amp service upgrade for a home that is still on undersized service all start with a load calculation to confirm what the property actually needs. We handle the panel work, the service-entrance upgrade where one is needed, and the circuit additions that follow. The full breakdown of what is covered is on the service page.
Running a new circuit to a structure that did not previously have power, installing a Level 2 EV charger, or wiring a solar battery hookup are all installation jobs that start at the panel and work outward. We confirm panel capacity first, run load calculations, and install to code. We treat your home and its wiring the way we would our own, and that applies whether the job is a single new outlet or a complete service upgrade.
Some electrical faults are straightforward. Others are not. A breaker that trips only when two specific appliances run at the same time, a light that flickers only in certain weather, or a circuit that fails under load but tests fine when nothing is drawing from it all require a different kind of diagnostic approach.
Finding an intermittent fault means testing the circuit under the conditions that cause it to fail, not just checking the obvious points when everything is behaving. Connections that are loose but not broken, wiring that has degraded inside a wall, and breakers that are failing gradually rather than all at once can all produce symptoms that seem random until the pattern is found. We trace the fault. We fix the wiring. We restore the power.
This kind of diagnostic work takes time, and it is worth doing properly. A repair that addresses the symptom without finding the cause is a repair that gets repeated.
Uncertainty about cost is one of the main reasons people put off calling an electrician. The honest answer is that the price depends on what the job involves, and that is only clear once we know what we are looking at. What we can tell you is how the conversation goes.
When you call, you describe what is happening. We ask about the panel, the circuit, the age of the property, and what has already been tried. Based on that, we give you a rate before anything is scheduled. If the job turns out to be more involved than the first call suggested, we explain what we found and confirm the revised scope before proceeding. You are not handed a bill at the end that does not match what you agreed to at the start.
What changes a quote is usually the condition of the existing wiring, whether the panel has capacity for what is being added, and how much access the job requires. Clear communication from the first call to the final test is how we handle every project.
Properties in a town this size tend to have a range of wiring histories. Some were built with aluminum branch-circuit wiring, which was common for a period and is still found in homes that have not been rewired since. Aluminum wiring is not automatically a crisis, but it requires specific devices, connections, and termination methods to be safe. Where those are not in place, remediation is the right call.
Knob-and-tube wiring turns up in older structures, and its condition varies. Some of it is intact and functional. Some of it has been spliced into, covered with insulation it was never designed to work with, or extended with materials that do not match. We assess what is there, explain what it means, and carry out the remediation the property actually needs rather than recommending more than is warranted.
Ungrounded two-prong outlets, missing GFCI protection, and wiring that was added during a renovation without being brought up to current code are all common findings in older properties. An electrical safety inspection is a good starting point when the history of a property's wiring is unclear.
The job types that come up most often for properties like those found in and around Edgewood are not random. They follow from the housing stock, the lot sizes, and the way these properties have been used and added onto over time. Here is what each of those jobs actually involves.
An inspection gives you a documented picture of the wiring, the panel, the grounding, and the protection devices throughout the property. It is worth scheduling before a purchase, after a sale, or when a property has not had a licensed electrician look at it in a long time. The report identifies what is working correctly and what needs attention, so decisions can be made on actual findings rather than guesswork.
GFCI protection is required by code in kitchens, bathrooms, garages, and exterior locations. AFCI protection is required on circuits serving living areas and bedrooms in current construction and renovation work. Older properties frequently have neither, and adding them is straightforward work that significantly reduces the risk of shock and arc faults. We check for missing protection during any panel visit and address it as part of the job.
A detached garage or workshop that needs more than a single circuit is a candidate for a subpanel fed from the main. This gives the structure its own breaker positions, keeps the loads organized, and avoids running multiple individual circuits back to the main panel. We size the subpanel to what the structure actually needs, run load calculations, and install to code.
Where knob-and-tube wiring is present and has been compromised, replacement is the right path. Partial rewiring addresses specific circuits or areas. Whole-home rewiring is the answer when the existing wiring is too far gone to remediate in sections. Either way, the work is planned around minimizing disruption to finished walls where possible and documented so the next inspection has a clear record.
Running a supply to a structure that currently has no power is a common job on larger lots. The work involves sizing the circuit for the intended load, running the appropriate wiring and conduit, and connecting at both ends with code-compliant devices. Electric gate operators have specific circuit requirements, and we confirm those before the circuit is run. We'll handle the wiring so you don't have to.
We serve Edgewood and the surrounding communities throughout this part of Santa Fe County. If you are in Thunder Mountain, Cedar Grove, Sandia Knolls, Sedillo, or Barton, we cover those areas too. The same process applies wherever you are calling from: describe the problem, get a rate on the phone, and get on the schedule. We keep your home powered and safe.
the panel and wiring page covers what the work involves before you call.
Yes. A pre-purchase inspection gives you a clear picture of the wiring, the panel, and the protection devices before the transaction is complete. It identifies anything that needs attention so you can factor it into the decision rather than discovering it after the fact. We document what we find and explain what each item means in plain terms.
We cover the full property. Detached garages, workshops, sheds, and outbuildings are common in this area, and running a supply, adding a subpanel, or addressing wiring in a structure that is separate from the main house is work we handle regularly. The same code requirements apply, and we install to meet them.
We check what is available for the panel make and model in question. Some older breakers can still be sourced through supply channels. Where a direct match is not available, we explain the options, which may include replacing the panel or using a listed compatible breaker if one exists for that application.
We walk through what we found and explain which items are safety-critical, which are code deficiencies, and which are maintenance items that can be addressed on a future visit. You decide what gets scheduled and in what order. We give you a clear picture so the decision is yours to make.
It does. Older properties are more likely to have wiring types, panel configurations, and protection gaps that a newer build would not. An inspection on an older Edgewood property typically covers the condition of the existing wiring, whether the panel is appropriately sized, what GFCI and AFCI protection is in place, and whether any previous additions were done to code. The findings shape what remediation, if any, is needed.
Often yes, if the repair is straightforward and the parts needed are on hand. More involved repairs may need to be scheduled as a follow-up. We explain what we found, what fixing it involves, and whether it can be addressed the same day before any work begins.
It depends on what was done and whether it can be brought to code as installed. In some cases a correction is straightforward. In others, the work needs to come out and be redone properly. We assess what is there, explain the options, and let you decide how to proceed.
It depends on the scope of the work and which circuits are affected. Some jobs can be done in phases or during off-hours to minimize disruption. We discuss the operational impact when the job is scoped so you can plan accordingly.
That is determined when you call. If the property is managed by a third party or if billing needs to go to a landlord rather than a tenant, let us know at the time of scheduling so we can set up the job correctly from the start.
Yes. A converted or newly built space needs circuits sized for the loads it will carry, including lighting, outlets, and any dedicated appliances. We assess the panel capacity to confirm it can support the addition and run the circuits from there.
Silver Stream Electric takes calls for Edgewood and the surrounding area every day from 6:00 AM to 8:30 PM. Same-day service is often available. When you call (505) 596-6289, you describe what is happening, we ask what we need to know, and you get a rate before anyone is scheduled. The price is confirmed before the work starts. Local electricians. Safe wiring. Honest quotes.
Nearby towns we cover: Sandia Heights, Placitas, Bernalillo.
Browse our local coverage area.
Edgewood homes and businesses put real demands on their electrical systems, and the work varies from a single dead outlet to a full service upgrade. Below is a plain-language look at what each service covers, who it fits best, and what is practical to know before you call. Call (505) 596-6289 for a quote on any of these jobs.
| Service | What's Included | When You Need It | What to Keep in Mind |
|---|---|---|---|
| Dedicated Appliance Circuits | Kitchen appliance circuits, Laundry and dryer circuits, Garage workshop circuits, Home office and equipment circuits | Homeowners adding a major appliance or a workshop that needs its own circuit | We run a load calculation before adding a dedicated circuit to confirm the panel can carry it cleanly without affecting other circuits. |
| Outdoor & Misting-System Circuits | Outdoor outlet and circuit installation, Weatherproof box and cover installation, Misting system dedicated circuit, Patio and landscape power | Homeowners expanding outdoor living areas or adding a misting system for summer use | Outdoor circuits require weatherproof materials and outdoor-rated components. We specify what the location and the code require so the installation holds up through heat and monsoon season. |
| EV Charger Installation | Panel capacity check, Dedicated 240-volt circuit, Outlet or hardwired charger connection, Circuit test before completion | Edgewood residents putting daily highway miles on an EV who need reliable overnight charging at home | Edgewood's geography means a lot of drivers are covering real distance every day. A Level 2 charger makes overnight charging practical, and the job is straightforward when the panel is already sized for it. |
| Outlet & Switch Installation | GFCI and AFCI outlet upgrades, USB and tamper-resistant receptacles, Dimmer and smart switch installs, Additional outlets in under-served rooms | Homeowners updating older outlets or adding receptacles for modern use | GFCI protection is required by code in kitchens, bathrooms, garages, and outdoor areas. We flag any missing protection during the visit. |
| Solar & Battery Installation | Service-entrance upgrades for solar capacity, Dedicated inverter and battery circuits, Panel capacity confirmation, Grounding, bonding, and inspection coordination | Homeowners adding solar or battery backup who need the electrical infrastructure handled correctly | We handle the electrical side of the installation. New Mexico's solar resource is strong, and Santa Fe County has seen consistent adoption. The system needs the right panel capacity and wiring to pass inspection. |
| Electrical Panel UpgradesMost Popular | 100-amp to 200-amp service upgrades, Main panel replacement, Subpanel installation, Service-entrance and meter upgrades | Homeowners whose panel cannot support modern loads, an EV charger, or a home addition | A lot of Edgewood's established housing stock was built with 100-amp service. Air conditioning, EV charging, and home offices can push that panel to its limit quickly. |
| Ceiling Fan Installation | Fan-rated box installation or replacement, New circuit runs where needed, Fan and light kit wiring, Replacement of existing fans | Homeowners adding a fan to a room that does not have one or replacing an older unit | A standard ceiling box is not rated for a fan's weight and movement. If the existing box is not fan-rated, we replace it before the fan goes up. |
| Wiring & Rewiring | Whole-house rewiring, Knob-and-tube and aluminum wiring remediation, Remodel and addition wiring, Grounding and bonding corrections | Owners of older homes where wiring does not meet current standards | Aluminum branch circuit wiring and ungrounded two-prong outlets are common findings in established Edgewood neighborhoods. Each has a proper remediation path. |
| Electrical Safety Inspections | Pre-listing and pre-purchase inspections, Panel and wiring condition review, GFCI and AFCI coverage check, Grounding and bonding assessment | Home buyers, sellers, and landlords who need a documented look at the electrical system | Pre-listing inspections help sellers address items before a buyer's inspector flags them. Common findings include missing GFCI protection and undersized service. |
| RV Hookups | 30-amp and 50-amp RV outlet installation, Dedicated circuit from the panel, Weatherproof outlet and cover, Driveway or garage hookup wiring | Homeowners who store an RV on the property and want a proper shore power connection | A proper RV hookup requires a dedicated circuit sized for the rig. We confirm panel capacity and run the circuit to the driveway or garage with the right outlet and weatherproof cover. |
| Lighting Installation | Recessed and LED lighting, Under-cabinet kitchen lighting, Outdoor, security, and motion-sensor fixtures, Commercial interior lighting | Homeowners remodeling a room or adding exterior lighting for security | Edgewood's UV exposure and temperature swings are hard on outdoor fixtures. We specify outdoor-rated materials that hold up to the conditions here. |
| Electrical Repairs & Troubleshooting | Dead outlets and dead circuits, Flickering or dimming lights, Tripping breakers, Burning smells and fault tracing | Homeowners and tenants dealing with an unexplained electrical problem | A diagnostic visit traces the fault to its source before any repair is quoted, so you know exactly what is being fixed and why. |
| Whole-Home Surge Protection | Panel-level surge device installation, Full-home circuit coverage, Protection for appliances and electronics, Monsoon and lightning surge defense | Homeowners who want to protect appliances and electronics from grid and storm surges | Edgewood's monsoon season brings real surge risk from nearby lightning. A panel-level device addresses it at the source rather than outlet by outlet. |
| Breaker & Fuse Repair | Breaker replacement, Fuse panel service, Breaker that will not reset, Warm or buzzing panel investigation | Any home or business where a breaker trips repeatedly or will not hold | A breaker that trips often is not always a breaker problem. We check the circuit load before replacing hardware to confirm the fix addresses the real cause. |
Call (505) 596-6289 to get a quote on any of these services and get on the schedule.
(505) 596-6289