Homes in Edgewood cover a wide range of ages and conditions. Some were built when a 60-amp service and a handful of circuits were considered sufficient. Others went up more recently with modern panels but without the dedicated circuits that today's appliances and EV chargers demand. The mix means the work varies considerably from one property to the next, and scoping it correctly from the start is what keeps a visit from turning into a second one.
Commercial and light-use properties in a town this size tend to be small-footprint operations: a workshop, a small retail unit, a rental property with a detached garage that somebody rewired years ago and never documented. We handle all of it. We cover Edgewood for residential repairs, panel work, wiring, and the dedicated circuits that new equipment requires.
Call (505) 596-6289 and we will talk through what you have before anything is scheduled.
When you call, the first conversation is about the job itself. We ask what you are seeing, where in the property it is happening, and how long it has been going on. That information lets us scope the work before we schedule anything, so you know what the visit will cover and what it will cost. The price is confirmed on the call, not at the door.
We are available every day from 7:00 AM to 11:00 PM. If something needs attention quickly, ask what the schedule allows. We take short-notice work and treat a sparking outlet or a panel that is buzzing and warm as the kind of call that does not wait.
For rental properties, we work around occupants' schedules where the job allows. For a business that has to stay open, we plan which circuits need to come down and which can stay live, so the interruption is as narrow as possible. We will cover this on the call before anything is booked.
We treat your home the way we would want ours treated.
A Level 2 EV charger needs a dedicated 240-volt circuit, and the first question is always whether the panel has the capacity to carry one. Older homes with modest service entrance amperage sometimes need a panel upgrade before the charger circuit can be added. We check both at the same time and scope the full job.
Swapping a fixture is a quick job when the existing box and wiring are in good shape. It gets more involved when the box is not rated for a ceiling fan, when the circuit runs on aluminum branch wiring, or when recessed LED fixtures are going into a ceiling that was never wired for them. We assess what is there before pulling anything out, and we explain what the installation involves before we start.
A detached garage or workshop that needs its own circuits is best served by a subpanel fed from the main panel, rather than running individual circuits back to the house for every tool and outlet. The subpanel is sized for the load the space will carry, including any future circuits. Grounding and bonding are part of the installation, not an add-on.
A generator connected without a transfer switch is a hazard to anyone working on the utility line during an outage. A properly installed transfer switch isolates the home from the grid before the generator carries the load. We size the transfer switch to the generator's output, confirm which circuits it will serve, and test the switchover before we leave.
Some jobs require a full shutdown. A service-entrance upgrade, a panel replacement, or work that touches the main breaker takes the whole property down for the duration. We plan that in advance so it does not catch anyone off guard.
Most jobs do not need a full shutdown. Replacing an outlet, adding a circuit, or installing a subpanel typically means isolating the one circuit or breaker involved while the rest of the property stays live. For a home office or a business that cannot afford to lose power to the whole building, we work out which circuits are affected and which are not before we start.
The timeline for any job is discussed on the call when we scope the work. We do not quote a duration we cannot stand behind, but we do give you a realistic picture of what to expect so you can plan around it.
The price for electrical work depends on what the job actually involves. Three things move a quote more than anything else: what the fault turns out to be once it is traced, what has to be opened up to reach it, and whether the existing circuit or panel can carry the change being asked of it.
A straightforward outlet replacement on a circuit with no underlying issues is a different job from the same outlet replacement that reveals aluminum branch wiring behind the wall, or a loose neutral that has been arcing for months. We explain what we find before we continue, so the scope and the price are agreed before the work goes further.
Call (505) 596-6289 and we will scope the job on the phone.
You get the rate before anything is scheduled, and the price covers what was agreed. If something unexpected turns up once the work is underway, we stop and explain what changed before we proceed. Ask what the quote includes and you get a straight answer.
Simple booking. Clear pricing. Safe, solid wiring. The wider scope of the work is on our page listing every electrical service.
Commercial jobs in a town this size often come with the same constraint: the business has to stay open, or at least keep part of the site running, while the electrical work happens. That changes how the job is planned. We identify which circuits are essential to operations and which can be isolated, and we schedule work on the critical circuits for times when the business can absorb a brief interruption.
Out-of-hours work is part of what we take on for commercial properties. If the job needs to happen before the shop opens or after it closes, we can discuss what the schedule allows. The planning conversation happens on the call, before anything is booked, so there are no assumptions about what the site can tolerate.
For light industrial and workshop spaces, three-phase service, dedicated circuits for heavy machinery, and panel capacity for added equipment are all jobs we handle. The approach is the same: scope the job correctly, confirm the price, and plan the work around what the property needs to keep running.
The work extends beyond Edgewood itself. We cover Thunder Mountain, Cedar Grove, Sandia Knolls, Sedillo, and Barton, as well as the wider Santa Fe County area. If you are not sure whether your address falls within our range, call and ask. We will confirm it on the phone.
Properties in these communities tend to present the same range of work: older homes with wiring that was adequate at the time it was installed, outbuildings that have been added to over the years, and newer builds that need dedicated circuits for the equipment going into them. The job types are consistent. The details vary by property.
For customers managing multiple properties across Edgewood and the surrounding area, we handle ongoing electrical work across a portfolio. Call and tell us what you are working with.
Yes. An intermittent fault is often harder to diagnose than a steady one, but it is not less serious. Arcing connections and failing breakers frequently cause symptoms that appear and disappear before getting worse. Describing the pattern on the call helps us come prepared to trace it.
We provide documentation of the work completed at the end of the job. Keeping your own copy on file is useful for future reference, for permit records, and for any subsequent buyer or tenant who asks about the electrical system. Ask on the call if you need the documentation in a specific format.
Yes, in practical ways. Homes built several decades ago may have wiring systems, panel sizes, or grounding arrangements that were standard at the time but fall short of what modern loads and code expectations require. Aluminum branch-circuit wiring, knob-and-tube wiring, and undersized service entrances are all things we look for when we assess an older property. The call is the right place to describe what you know about the home's history so we can scope the visit accordingly.
A short window between tenants can be enough for targeted repairs, an inspection, or a specific installation if the scope is confirmed in advance. We discuss what is realistic given the time available and prioritize the most important work. Call with the dates and we will tell you what fits.
We do. An electrical safety inspection covers the panel, wiring, outlets, grounding, and bonding, and it gives a clear picture of what the current system looks like before any larger work is planned. Inspections are useful before a property changes hands, before a rewire is scoped, or when a landlord wants to confirm the condition of a rental. Call and describe the property and we will explain what the inspection involves.
The monsoon storm season across this part of New Mexico brings lightning activity that can send voltage spikes through the service entrance and into every circuit in the building. A whole-home surge protector installed at the panel intercepts those spikes before they reach appliances, electronics, and wiring. It is a single installation that covers the whole property, and it complements grounding and bonding work that gives fault current a safe path out.
Access arrangements for occupied properties are something we discuss when the job is booked. Options depend on whether the landlord can provide access or whether the tenant can arrange a window that works. We confirm the plan before the visit so the job does not have to be rescheduled because of an access problem.
We confirm the stage of the renovation before scheduling and coordinate the visit to happen at the right point in the build sequence. Rough-in work needs to precede drywall. Final connections and trim-out happen after the walls are finished. Getting us on the schedule early avoids delays caused by sequencing problems.
When you call, we ask what you are seeing and where. By the end of that conversation, you will know what the job involves, what it will cost, and what to expect when we arrive. We cover Edgewood every day from 7:00 AM to 11:00 PM.
We trace the fault. We fix the wiring. We restore the power.
Call (505) 596-6289 for a quote.
Also serving: Sandia Heights, Placitas, Bernalillo, North Valley.
See our service map.
Below is a plain-language look at the electrical work we handle in Edgewood and Santa Fe County. Each row covers what the service includes, who it fits best, and one practical thing worth knowing before you call. If your situation does not fit neatly into a row, call us and we will scope it on the phone.
| Service Type | What It Covers | Common Situations | Worth Knowing |
|---|---|---|---|
| Solar & Battery Installation (Electrical Side) | Solar circuit wiring and connection, Battery backup system hookup, Panel upgrade for solar input, Code-compliant interconnection work | Edgewood homeowners adding solar panels or battery storage who need the electrical side handled separately from the hardware installation | New Mexico is one of the strongest residential solar markets in the country. We handle the wiring and panel side only. We do not sell or install the panels or battery hardware itself. |
| Wiring & Circuit Installation | Whole-home and room rewiring, Aluminum and knob-and-tube remediation, Remodel and addition wiring, Grounding and bonding upgrades | Older homes with outdated wiring or any property undergoing a remodel or addition | Aluminum branch-circuit wiring, common in homes built during certain decades, requires specific connectors and devices. Standard copper-rated hardware does not address the risk. |
| Electrical Panel & Service Upgrades | 200-amp service upgrades, Subpanel installation, Load calculation and sizing, Meter and service-entrance work | Homes adding EV chargers, solar, heavy appliances, or running out of breaker slots | Edgewood's rapid growth means many homes carry panels sized for far less demand than current appliances and additions place on them. A load calculation tells us exactly what the replacement needs to handle. |
Call (505) 596-6289 and we will scope your job on the phone, give you a clear price, and get it on the schedule.
(505) 596-6289